Types: Toolkits
Types
- ASN1EncodeTypes.ErrorCode
- In case of an error, the custom output function ErrorCode() can be used to determine the cause of the problem.
- AutoForecasterTypes.AutoForecasterUpdateParamsType
- This type should be used to send updates to the control port of the AutoForecaster operator
- BWListAction_e
- Action Type for dynamically updating the BWListTagger operator
- BWListTag_e
- Tag type for the BWListTagger operator.
- BWListType_e
- This enum type contains the valid output values of the BWListTagger operator.
- BWListUpdate_t
- Type for dynamically updating the BWListTagger operator
- BinaryPayloadType
- Blob
- Tuple type representing binary tuples.
- BloomFilterTypes.Event
- Indicates which configured fill level threshold was reached.
- BloomFilterTypes.Kind
- Indicates whether the sent tuple is a command response or an event that was raised because of the alarm threshold configuration.
- BloomFilterTypes.Response
- Indicates whether a command, which was received on the command input port of the BloomFilter, failed or succeeded.
- BloomFilterTypes.Result
- Specifies the result of the BloomFilter operation:
- BloomFilterTypes.Status
- The attributes of the type are filled with BloomFilter status information.
- ConnectionCloseMode
- The persistence of the ftp connection can be controlled with parameter connectionCloseMode.
- Control.TopicPartition
- Tuple type for a topic partition to be added or removed
- Control.TopicPartition
- Tuple type for a topic partition to be added or removed
- Control.TopicPartitionOffset
- Tuple type for a topic partition with offset to be added
- Control.TopicPartitionOffset
- Tuple type for a topic partition with offset to be added
- ConvolveAlgorithmTypes.ConvolveAlgorithmType
- An enum type that allows for specifying the algorithm to use when performing convolution.
- CrossCorrelateTypes.CrossCorrelateAlgorithmType
- An enum type that allows for specifying the algorithm to use when performing cross correlation.
- CrossCorrelateTypes.CrossCorrelateMultiOutputType
- This type can hold the results of the CrossCorrelate operator when using the PEARSON algorithm.
- DNSTunnelingInput_t
- DNS Tunneling input type
- DNSTunnelingResult_t
- DNS Tunneling result type
- DPDNSResponseMessage_t
- Domain Profiling
- DPFeatureVector_t
- This type is part of the DomainProfilingAnalysisInput_t type.
- DSPFilterTypes.DSPFilterType
- An enum type that can be passed to the DSPFilter operator as an input attribute to enable dynamically setting the filter type to use (either highPass or lowPass)
- DataSnapshotRowType
- DatabaseResponseType
- DomainProfilingAnalysisInput_t
- Domain Profiling Analysis input type
- DomainProfilingInput_t
- This type should be used as the input type of the DomainProfiling operator.
- DomainProfilingResult_t
- This type should be used as the output type of the DomainProfiling operator.
- FlightPathEncounterTypes.EncounterEvent
- The FlightPathEncounter operator creates encounter events as output.
- FlightPathEncounterTypes.Observation3D
- The FlightPathEncounter operator processes observations of flying objects.
- GeometryMapMatcherTypes.EdgeData
- The GeometryMapMatcher operator generates a list of edges that are at least partially covered or are in proximity to the given geometry.
- GeometryMapMatcherTypes.ResultCode
- The GeometryMapMatcher operator returns the following error codes from the getResultCode() custom output function.
- HPDNSResponseMessage_t
- Host Profiling
- HPFeatureVector_t
- This type is part of the HostProfilingAnalysisInput_t type.
- HTTPParallelRequest.HttpMethod
- This type determines the kind of the http operation values are httpGet, httpPut, httpPost, httpDelete
- HTTPRequest
- Output and Input schema, web request output from HTTPRequestProcess operator and corresponding response on the input port are returned to the web.
- HTTPResponse
- Output Stream Schema for HTTP operators
- HearbeatSignalType
- HeartbeatMessageType
- HostProfilingAnalysisInput_t
- Host Profiling input type
- HostProfilingInput_t
- This type should be used as the input type of the HostProfiling operator.
- HostProfilingResult_t
- This type should be used as the output type of the HostProfiling operator.
- HttpBinaryPayloadType
- HttpResponseType
- IPASNInfo_t
- ASN record associated with the input IP address
- IPASNumber_t
- 32-bit ASN number
- IPLocation_t
- MaxMind
- JdbcSqlStatus_T
- SQL Status:
- Json
- Default tuple type for representing JSON object.
- Json
- Tuple type for representing JSON.
- JsonIndex.type_1
- Single-value enum type with value JsonIndex._1 to reference internal stored JSON object
- JsonIndex.type_10
- Single-value enum type with value JsonIndex._10 to reference internal stored JSON object
- JsonIndex.type_11
- Single-value enum type with value JsonIndex._11 to reference internal stored JSON object
- JsonIndex.type_12
- Single-value enum type with value JsonIndex._12 to reference internal stored JSON object
- JsonIndex.type_13
- Single-value enum type with value JsonIndex._13 to reference internal stored JSON object
- JsonIndex.type_14
- Single-value enum type with value JsonIndex._14 to reference internal stored JSON object
- JsonIndex.type_15
- Single-value enum type with value JsonIndex._15 to reference internal stored JSON object
- JsonIndex.type_16
- Single-value enum type with value JsonIndex._16 to reference internal stored JSON object
- JsonIndex.type_17
- Single-value enum type with value JsonIndex._17 to reference internal stored JSON object
- JsonIndex.type_18
- Single-value enum type with value JsonIndex._18 to reference internal stored JSON object
- JsonIndex.type_19
- Single-value enum type with value JsonIndex._19 to reference internal stored JSON object
- JsonIndex.type_2
- Single-value enum type with value JsonIndex._2 to reference internal stored JSON object
- JsonIndex.type_20
- Single-value enum type with value JsonIndex._20 to reference internal stored JSON object
- JsonIndex.type_3
- Single-value enum type with value JsonIndex._3 to reference internal stored JSON object
- JsonIndex.type_4
- Single-value enum type with value JsonIndex._4 to reference internal stored JSON object
- JsonIndex.type_5
- Single-value enum type with value JsonIndex._5 to reference internal stored JSON object
- JsonIndex.type_6
- Single-value enum type with value JsonIndex._6 to reference internal stored JSON object
- JsonIndex.type_7
- Single-value enum type with value JsonIndex._7 to reference internal stored JSON object
- JsonIndex.type_8
- Single-value enum type with value JsonIndex._8 to reference internal stored JSON object
- JsonIndex.type_9
- Single-value enum type with value JsonIndex._9 to reference internal stored JSON object
- JsonParseStatus.status
- Errors returned by parseJSON()
- JsonStatus.status
- Errors returned by queryJSON()
- KeyForDatabaseReadOrDeleteType
- Log.Level
- This type, when it is used with the appLog function, species the logging level.
- MBeanNotification
- Type that represents a JMX notification from an MBean.
- MBeanNotificationBase
- Base type that represents most attributes of a JMX notification from an MBean.
- MBeanNotificationUserString
- Type containing a single attribute that is used to extract the user data as an rstring from a JMX notification.
- MQTTBlobMsg
- Minimum Input/Output Stream Schema type for MQTT operators
- MQTTRStringMsg
- Minimum Input/Output Stream Schema type for MQTT operators
- MQTTSinkUpdate.ControlPortType
- The expected schema for the control input port in the MQTTSink operator
- MQTTSourceUpdate.ControlPortType
- Expected schema for the control input port of the MQTTSource operator
- MQTTSourceUpdate.TopicsUpdateAction
- Actions that can be applied to update the topics / Qos for MQTTSource operator
- MQTTSourceUpdate.TopicsUpdateDesc
- A descriptor to describe how the topics / qos should be updated in MQTTSource operator.
- Output schema of the ReadMail operator
- Maile
- Extended output schema of the ReadMail operator with error information
- MapStoreTypes.Events
- The MapStore operator sends event tuples to indicate important state changes.
- MapStoreTypes.TupleTypes
- The MapStore operator sends two types of tuples to its output port.
- MappedPosition
- Convenience type that corresponds to the expected attributes for the default mapping visualization.
- MappedPositionIcon
- Convenience type that corresponds to the expected attributes for default mapping visualization using icon path for markers and a note.
- MappedPositionIconLayer
- Convenience type that corresponds to the expected attributes for default mapping visualization using a layer, icon path for markers and a note.
- MappedPositionMarker
- Convenience type that corresponds to the expected attributes for default mapping visualization using the pre-defined markers and a note.
- MappedPositionMarkerLayer
- Convenience type that corresponds to the expected attributes for default mapping visualization using a layer, pre-defined markers and a note.
- MarkerType
- Type of the marker to display for a point on the default map visualization by HTTPTupleView.
- MessageType.BlobMessage
- This type represents a message with message attribute of type blob and key attribute with SPL type rstring.
- MessageType.BlobMessage
- This type represents a message with message attribute of type blob and key attribute with SPL type rstring.
- MessageType.ConsumerMessageMetadata
- This type represents the meta data of a received message.
- MessageType.ConsumerMessageMetadata
- This type represents the meta data of a received message.
- MessageType.StringMessage
- This type represents a message with message and key attribute, both being rstring.
- MessageType.StringMessage
- This type represents a message with message and key attribute, both being rstring.
- MessageType.TopicPartition
- This type represents a topic and a partition number.
- MessageType.TopicPartition
- This type represents a topic and a partition number.
- ModelData
- The ModelData type contains a new model and the meta-data describing the model.
- PBDNSResponseMessage_t
- This type is part of the PBFeatureExtractorInput_t type.
- PBFeatureExtractorInput_t
- This type should be used the input type of the PredictiveBlocklistingFE operator.
- PBFeatureVector_t
- This type is part of the PredictiveBlocklisting_t type.
- PredictiveBlocklisting_t
- This type should be used as the output type of the PredictiveBlocklistingFE operator and the input and output type of the PredictiveBlocklisting operator.
- ProfilingDNSResponseMessageBase_t
- This type is part of the DPDNSResponseMessage_t type.
- Protocol
- The security level of all ftp connections are controlled with the parameter protocol.
- RegionMatchTypes.RegionInfo
- The RegionMatch operator matches device locations against geographical rgions stored in tte operator.
- RemoteDataCenterStatusType
- RuntimeError
- Minimum output schema for the optional error port
- SpecialMessageType
- String
- Tuple type representing string tuples.
- Sys.CongestionPolicy
- CongestionPolicy is used for the config threadedPort clause.
- Sys.Kind
- This enum is used when custom metrics are created.
- Sys.LogLevel
- The Log level for message logging.
- Sys.OperatorInputPortMetricName
- This enum is used when input port metrics are accessed.
- Sys.OperatorOutputPortMetricName
- This enum is used when output port metrics are accessed.
- Sys.OperatorSystemMetricName
- This enum is used when operator system metrics are accessed.
- Sys.PEConnection
- This tuple type gets connection information for a processing element output port.
- Sys.PEConnections
- This type is a list of PEConnection tuple types.
- Sys.PaneTiming
- The timing of a window pane triggering in relation to the enclosing operator's watermark that is used for predicting pane completion.
- Sys.PartitionEvictionKind
- This enum is used to specify the partition eviction policy for a window.
- Sys.PartitionEvictionSelection
- This enum is used to specify the method for evicting a partition from a window.
- Sys.PoolSharingMode
- This enum is used with SPL config specifications.
- Sys.Punctuation
- Punctuation types returned by currentPunct().
- Sys.Resolution
- This is the resolution of the event time of an event-time window.
- Sys.TimestampFormat
- This enum is used to specify the format used for the toTimestamp built-in function.
- Sys.tm
- tm is used for the time and gmtime built-in functions.
- TSTypes.ConfidenceInterval
- This type represents a confidence interval for forecasting results.
- TSTypes.TSSignal
- An enum type containing possible control signals supported by the timeseries toolkit.
- TimeMillis
- Milliseconds since epoch (1970-01-01 00:00:00.000). Useful when interfacing to Java and Javascript.
- Trace.Level
- This type, when it is used with the appTrc function, specifies the tracing level.
- Types.SpaceInfo
- Specifies disk space statistics that are returned by the space function:
- UpdateFlags
- UpdateFlags specifies what update operation is to be performed by PointMapMatcher on the geometry using the provided data.
- UpdateType
- UpdateType specifies the type of geometry update to be consumed by PointMapMatcher.
- VARTypes.VARCoefficientType
- This type can hold the results returned by the coefficients() output function.
- VARTypes.VARGrangerType
- This type can hold the results returned by the getGrangerCausality() output function.
- VARTypes.VARUpdateParamsType
- This type can be used to send updates to the control port of the VAR operator.
- WMLModelMetaData
- The WMLModelMetaData type contains a set of meta-data by which each model in WML repository is identified.
- XML
- Tuple type representing XML tuples.